| IMPORTANT: Read the following information
carefully before attempting the spotting procedures described in
this guide. Maintenance: Proper maintenance of your carpet
will extend its useful life and help retain its fresh appearance
longer . You should vacuum properly to remove dry particulate
soils (which is the major contributor to premature wear), promptly
address all spills before they become stains and provide long-term
care with professional deep cleaning.
Regular Cleaning: It is essential that you vacuum regularly with
a strong, well-functioning vacuum cleaner. A good vacuum cleaner
features high-efficiency filtration (HEPA). Correct brush height
is necessary to spread the fibers to remove embedded soils. Rental
machines(Rug Doctor) and personally owned machines (Bissell,Little
Green Steam Machine) are acceptable for use in rinsing spots and
spills but should never be thought of as a replacement for periodic
professional cleaning.
Protecting Against Permanent Stains: Most of today's carpet is
treated with Scotchgaurd, Teflon or a similar product to resist
soil and stains. However, no carpet is entirely stain-proof. Many
fiber manufacturers provide toll-free help for cleaning assistance
(consult your warranty) or contact Al's Absolute Best Carpet &
Upholstery Cleaning 1-860-537-1594. Reapplication of the protection
is recommended to restore the fiber to the condition the manufacturer
intended. Some warranties can be voided without reapplication
of the protection. Be sure to read your warranty.
On stain-resistant finishes, a spill on the fiber's surface,
will temporarily remain on the surface
without soaking in, giving you some time to absorb the liquid
and use spot removal techniques before the spill has a chance
to penetrate the fibers and cause permanent damage.The longer
you leave the spill unattended, the more difficult it will be
to remove.
Use the following spot removal chart to select a cleaning agent
for emergency spot removal for different substances: Many spots
require more than one cleaning agent/method. Continue using the
first method until there is no longer a transfer of spot to the
cleaning cloth. Then try the second method suggested, then the
third, and fourth, etc. until the spot is successfully removed.
Pretest the cleaning agent in a small, inconspicuous area to ensure
that the solution will not damage the carpet or its dyes. With
a clean, white, absorbent cloth, gently work in the cleaning agent
from the edges of the spot to the center. Never from the center
out or you risk spreading the spot. Do not vigorously scrub, gently
blot. Thoroughly blot and repeat until the spot no longer transfers
to the cleaning cloth. Use clean lukewarm tap water to remove
any remaining residue. Absorb remaining moisture with an absorbent
cloth. Drying can be accelerated by air movement ( fans, dehumidifiers,
heating/air-conditioning, open windows) When completely dry, brush
or vacuum the pile to restore body/texture.
Due to the wide variety of spotting agents and the fibers they
are used on Al's Absolute Best Carpet & Upholstery Cleaning
can assume no responsibility for any damage occurring. Always
proceed with caution and only after pretesting each cleaning agent.
|